System Top Cover Removal / Installation; System Top Cover Removal; Figure 3. System Top Cover Screws; Figure 4. System Cover Removal - Intel M20NTP1UR System Integration And Serive Manual

Intel® Server System M20NTP1UR - System Integration and Service Guide
2.1

System Top Cover Removal / Installation

Required Tools and Supplies
Anti-static wrist strap and conductive workbench pad (recommended)
•
• Phillips* head screwdriver #1
2.1.1

System Top Cover Removal

Removal of the top cover is necessary when installing or replacing any system component within the server
chassis.
The system ships from the factory with the top cover secured to the chassis using three screws.
1. Remove the three top cover screws (See
Note: A non-skid surface or a stop behind the server system may be needed to prevent the server system
from sliding on the work surface.
2. Remove the top cover (See
18
Figure 3).

Figure 3. System Top Cover Screws

Figure 4)

Figure 4. System Cover Removal