Standard Front Control Panel Installation (R2308Wfxxx); Figure 130. Control Panel Board Removal; Figure 131. Control Panel Board Installation - Intel R2000WF series Service Manual

Intel ® Server System R2000WF Product Family System Integration and Service Guide
10. Remove the screw securing the control panel module to the drive bay module (see Letter 'A')
11. Remove the control panel board from the back of the drive bay module (see Letter 'B')
7.4.2

Standard Front Control Panel Installation (R2308WFxxx)

1. Locate and remove the replacement control panel board from its packaging – (Intel Product Code –
FXXFPANEL2).
2. Connect the 30-pin ribbon cable to the new control panel.
3. Install the control panel board into the back of the drive bay module (see Letter 'A').
Note: Ensure the plastic bracket over the control panel buttons is securely in place before installing the
control panel board into the drive bay module.
4. The control panel is properly positioned when the buttons are protruding from the Control Panel face
plate on the front of the drive bay module and the screw holes on the top of the module are aligned.
5. Using a single screw, secure the control panel module to the drive bay module (8 in/lbf torque) (see
Letter 'B').
6. Ensure the control panel cable is securely attached to the control panel board.

Figure 130. Control Panel Board Removal

Figure 131. Control Panel Board Installation

117