Intel® Server System R2000WF Product Family System Integration and Service Guide
3.3
Intel
®
Remote Management Module 4 Lite Key – Installation / Removal
3.3.1
Intel® RMM4 Lite Key Installation
1.
Remove the Intel® RMM4 Lite key from its packaging.
2.
Locate the Intel® RMM4 Lite connector on the server board next to the front panel USB 2.0 connector.
3.
Place the Intel® RMM4 Lite key over the connector and match the orientation of the key to that of the
connector.
4.
Press the key down onto the connector.
3.3.2
Intel® RMM4 Lite Key Removal
1.
Power off the system and disconnect the power cable(s).
2.
Remove the system cover (see Section 2.2.1).
3.
Carefully grasp the key by its edges and pull it up until it disengages from the connector.
70
Figure 79. Intel
®
RMM4 Lite Key Installation