Autoplay New Message - Panasonic KX-NS500 Features Manual

Notice
When disabling the password requirement, ensure that an unauthorised third-party is not allowed access
to your extension.
Conditions
•
Access from outside telephones will be enabled automatically after a Caller ID number, DID number, or
trunk group number is assigned. A trunk group number or DID number can be assigned by the System
Administrator only.
•
When this feature is activated, "Toll Saver" is also available.
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
→ Auto Login Extension
→ Auto Login Extension Password Entry Requirement
→ Auto Login Caller ID 1, 2
→ Auto Login Caller ID Password Entry Requirement
→ Auto Login DDI/DID
→ Auto Login TRG No.
→ Auto Login DDI/DID, TRG No. Password Entry Requirement
→ Auto Login Toll Saver
Feature Guide References
3.2.2.29 Toll Saver
User Manual References
Subscriber Operation
1.8.6 Other Features—

3.2.2.3 Autoplay New Message

Description
It is possible to play new messages automatically when a subscriber or the System Manager/Message
Manager logs into his or her mailbox. There is no need to press [1] to receive the new messages.
Conditions
•
If there is more than one new message in the mailbox, it can be set whether or not messages will be played
continuously without system prompts.
® 21.1 UM Configuration—[2] Class of Service—Mailbox—
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service—Mailbox—
Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver
Play New Messages Sequentially
Autoplay New Message
3.2.2 Subscriber Features
Feature Guide 355