Panasonic KX-NS500 Features Manual page 252

2.21.2 Flexible Buttons
Button
Wrap-up
*1
System Alarm
Time Service
*1
Answer
Release
Toll Restriction/Call Barring
ISDN Service
Calling Line Identification
Restriction (CLIR)
Connected Line Identification
Restriction (COLR)
ISDN Hold
Headset
Time Service Switching Mode
(Automatic/Manual)
Two-way Record
Two-way Transfer
One-touch Two-way Transfer
Live Call Screening (LCS)
Voice Mail (VM) Transfer
Check-in
Check-out
Cleaned-up
CTI
Primary Directory Number (PDN)
252 Feature Guide
Used to switch the Wrap-up/Not Ready and Ready modes.
Used to confirm a PBX error.
Used to switch the assigned time modes: day, lunch, break or night.
Also used to check the current time mode status.
Used to answer an incoming call.
Used to disconnect the line during or after a conversation, or to
complete a Call Transfer.
Used to change the TRS/Barring level of other extension users
temporarily.
Used to access an ISDN service.
Used to switch between the CLIP and CLIR service.
*1
Used to switch between the COLP and COLR service.
*1
Used to transfer a call using the telephone company.
Used to turn on/off the headset mode while idle.
Used to switch between hands-free mode and headset modes
during a conversation.
Used to switch between the Automatic Switching and Manual
Switching mode.
*1
Used to record a conversation into your own mailbox.
Used to record a conversation into the mailbox of a specified
extension.
Used to record a conversation into the mailbox of a specified
extension with one touch.
Used to monitor your own voice mailbox while an incoming caller is
leaving a message and, if desired, intercept the call.
Used to transfer a call to the mailbox of a specified extension. Also
used to access the Unified Messaging system (®3.2 System and
Subscriber Features) or the voice mail features of a VPS
(®2.28.3 Voice Mail DPT (Digital) Integration).
Used to switch the status of extensions from Check-out to Check-in.
Used to switch the status of extensions from Check-in to Check-out.
Used to switch the room status of extensions between Ready and
Not Ready.
Used to access CTI features.
Used to make and receive both outside and intercom calls.
(® 2.9.1 Primary Directory Number (PDN)/Secondary Directory
Number (SDN) Extension)
Usage