Floating Extension - Panasonic KX-NS500 Features Manual

5.5.8 Floating Extension

Description
Virtual extension numbers can be assigned to resources to make them appear as extensions. This feature is
also known as Floating Station.
These numbers are defined as floating extension numbers and can be assigned as a destination of incoming
calls etc.
Resource
Device External Pager
Outgoing Message
(OGM)
Built-in Simplified
Voice Message
(SVM)
Analogue Remote
Maintenance
ISDN Remote
Maintenance
Group Incoming Call
Distribution Group
PS Ring Group
VM (DPT) Group
VM (DTMF) Group
UM Group
The default floating extension number depends on the value specified for Numbering Plan in Easy Setup.
*1
A default floating extension number is provided only up to group 64. The floating extension number for groups 65 and higher must
*2
be set explicitly.
Conditions
•
It is possible to give names to floating extension numbers.
Installation Manual References
5.4.1 Easy Setup Wizard
Description
Used as the destination for TAFAS feature.
(® 2.17.2 Trunk Answer From Any Station
(TAFAS))
Used to send messages for DISA feature.
(® 2.16.1 Direct Inward System Access
(DISA))
Used to access message boxes associated
with extensions. (® 2.16.3 Built-in Simplified
Voice Message (SVM))
Used to access the PC programming mode
through a modem on a PC.
Used to access the PC programming mode
through the ISDN interface on a PC.
Used to call an incoming call distribution
group. (® 2.2.2.1 Incoming Call Distribution
Group Features—SUMMARY)
Used to call a PS ring group. (® 5.2.4.2 PS
Ring Group)
Used to call a VM (DPT) group.
Used to call a VM (DTMF) group.
Used to call a UM group.
5.5.8 Floating Extension
Default
600 or 6000
*1
5 or 50 +
two-digit
group
number
*1
591 or 5091
*1
599 or 5099
*1
699 or 6099
*1
6 or 60 +
two-digit
group
number
*1*2
—
—
—
500 or 5000
*1
Feature Guide 547