Panasonic KX-NS500 Features Manual page 78

2.2.2 Incoming Call Distribution Group Features
Conditions
CAUTION
If the Call Log for Built-in ACD Report setting for the Supervisory Monitor (ACD) Control feature is enabled
through system programming, the Hospitality feature cannot be used. For details, refer to the relevant
chapter in this Feature Guide or consult your system administrator.
•
KX-NSF201 (Call Centre Feature Enhancement) is required to use this feature.
•
Up to 16 users can be set as an ACD supervisor through system programming.
•
An SD Memory Card (KX-NS5134/KX-NS5135/KX-NS5136) is required to save ACD reports.
–
With SD Memory Card: 300000 calls
Feature Guide References
2.23.2 Room Status Control
2.23.3 Call Billing for Guest Room
PC Programming Manual References
8.4 Users—ICDG Management
11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous
11.5.4 PBX Configuration–[3-5-4] Group—Incoming Call Distribution Group—ACD Supervisor
User Manual References
1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features)
4.1.3 Supervisory Monitor (ACD) Control
78 Feature Guide