Panasonic KX-NS500 Features Manual page 84

2.3.2 Call Forwarding (FWD)
•
Even though DSS buttons for the forwarding extension indicate that the extension is busy, it can still receive
calls. If another call is received, FWD—No Answer will operate as normal.
•
It is possible to set the forwarding extension to busy through system programming.
•
When the forwarding extension is a virtual PS (® 5.2.4.6 Virtual PS)
–
The No Answer Time setting is ignored: All calls are forwarded immediately, even if No Answer is
specified as the forwarding method.
–
If the forward destination is unavailable, the forwarding extension is treated as busy. (In this case,
FWD—Busy is ignored even if it is enabled.) However, if the original caller is on an analogue trunk, to
which busy signals/tones cannot be sent, the PBX will continue to try to connect to the forward
destination until a connection is established or the original caller hangs up.
–
It is possible to set the forwarding extension virtual PS to busy through ICD Group programming.
•
If an extension goes on-hook while transferring a call to an extension ringing in parallel with a trunk, the
trunk will stop ringing for a moment, then begin ringing again.
•
This feature for LCOT depends on the settings for reverse signal detection. (®2.5.4.5 Reverse Circuit)
•
This feature may not be available depending on the specifications of the telephone network.
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Set
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
→CO & SMDR—
→Manager—
→Optional Device & Other Extensions—
10.9 PBX Configuration—[2-9] System—System Options—Option 1—
Mobile Integration (FWD NA to CO)
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Main
→ CO-CO Duration Time (*60s)
→ Extension-CO Duration Time (*60s)
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group
Settings—Miscellaneous—
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Group Log /
Group FWD
11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous—
Options—2nd line LCD display information for ICD Group redirected call
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—FWD / DND
12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—FWD / DND
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
PT Programming Manual References
[472] Extension-to-Trunk Call Duration
[473] Trunk-to-Trunk Call Duration
[504] Call Forwarding to Trunk
[605] Call Forwarding—No Answer Time
Feature Guide References
2.1.1.6 Intercept Routing
2.2.1 Idle Extension Hunting
2.2.2.7 Overflow Feature
84 Feature Guide
Call Forward to CO
Group Forward Set
Status of FWD for Virtual PS
Remote Operation by Other Extension
FWD No Answer Timer
PT Fwd / DND—Extension Status of