Integration With Communication Bridge - Panasonic KX-NS500 Features Manual

2.26.3 Integration with Communication Bridge

2.26.3 Integration with Communication Bridge
Description
This PBX can integrate with Poltys
client, which is called the Mobile UC (Unified Communication).
A Mobile UC is software that enables features such as presence detection and text chat on a SIP softphone
for a smartphone or tablet. The Mobile UC operates as a SIP telephone, which means it can provide basic
telephone features such as transfer and hold.
Conditions
•
Activation keys are required to enable Communication Bridge integration. Some activation keys are
preinstalled on the mother board.
•
A Mobile UC is registered to the PBX as a general SIP phone. Therefore, the same activation key
registration is necessary as for other general SIP phones.
•
A Mobile UC connects to the PBX via a Media Relay Gateway or a VPN.
•
For details about Poltys CA RCS, refer to the corresponding documents.
•
If a Mobile UC is used with the One-numbered Extension feature, CTI control will be applied to the main
extension number of the one-numbered extension.
PC Programming Manual References
7.7.1 Utility—Email Notification—Alert
9.3 PBX Configuration—[1-1] Configuration—Slot—Activation Key Status
Feature Guide References
2.11.11 One-numbered Extension
2.26.2 CA (Communication Assistant)
298 Feature Guide
Communication Bridge and a softphone specified by Poltys as the mobile
®