Panasonic KX-NS500 Features Manual page 24

2.1.1 Incoming Trunk Call Features
Note
The following settings can also be specified in the DIL table:
•
Tenant number: determines the time mode (day/lunch/break/night) for the corresponding trunk.
•
UM service group number: determines the service group to use when a call is handled by the Unified
Messaging system.
•
VM trunk group number: used in Voice Mail DPT (Digital) Integration with a VPS.
Explanation:
If a trunk call is received from trunk 01;
In Day mode: CLI is enabled. Route to CLI destination.
In Lunch mode: CLI is disabled. Route to DIL destination, extension 100.
PC Programming Manual References
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL
→ DIL Destination—Day, Lunch, Break, Night
→ Tenant Number
→ UM Service Group No.
→ VM Trunk Group No.
PT Programming Manual References
[421] BRI DIL/DDI/MSN Selection
[450] DIL 1:1 Destination
Feature Guide References
2.1.1.5 Calling Line Identification (CLI) Distribution
3.2.1.39 Service Group
5.1.3 Tenant Service
5.1.4 Time Service
6.1 Capacity of System Resources
24 Feature Guide