Qsig Enhanced Features - Panasonic KX-NS500 Features Manual

4.3.5 QSIG Enhanced Features

Description
When PBXs are networked using ISDN or V-IPGW cards, the following enhanced features are available.
When Calling an Extension in Another PBX and the Called Extension is Ringing
Feature
Leave Message Waiting
Absent Message Display
Ringing extension name display
before answer
When the Called Extension of Another PBX is Busy
Feature
Call Waiting
Executive Busy Override
Call Monitor
Leave Message Waiting
•
When a called extension on another PBX is busy, Automatic Callback Busy can be used as a Standard
QSIG feature (® 4.3.4.5 Completion of Calls to Busy Subscriber (CCBS)—by QSIG).
•
The caller will be informed an extension is busy with a busy tone and a display indication.
•
Soft button operation is available for Call Waiting, Automatic Callback Busy and Executive Busy Override.
When the Called Extension of Another PBX has Do Not Disturb (DND) Set
Feature
DND Override
•
The caller will be informed an extension is set to DND by a DND tone and a display indication.
•
Soft button operation is available for DND Override.
When Receiving a Call from an Extension of Another PBX
Feature
Ring tone
Call Waiting
Description and Reference
® 2.20.1 Message Waiting
® 2.20.2 Absent Message
The ringing extension's name is displayed to the caller before the
call is answered.
Description and Reference
® 2.1.3.3 Call Waiting
Note
When this feature is used over a network, a call waiting tone
will be sent, even if OHCA or Whisper OHCA is enabled.
® 2.10.2 Executive Busy Override
® 2.10.3 Call Monitor
® 2.20.1 Message Waiting
Description and Reference
® 2.3.3 Do Not Disturb (DND)
Description and Reference
Incoming calls from extensions in other PBXs are handled as
intercom calls in regards to ring tone settings.
® 2.1.3.2 Ring Tone Pattern Selection
Incoming calls from extensions in other PBXs are handled as
intercom calls in regards to Call Waiting settings.
® 2.1.3.3 Call Waiting
4.3.5 QSIG Enhanced Features
Feature Guide 447