Transfer Recall To A Mailbox; Transfer To Mailbox - Panasonic KX-NS500 Features Manual

3.2.1 System Features
•
In order to leave more time for recording, the System Administrator is also able to delete specific system
prompts or one of the installed languages used for system prompts.
PC Programming Manual References
7.9 Utility—UM – System Prompts Customisation
21.1 UM Configuration—[2] Class of Service—
24.4 UM Configuration—[5-4] System Parameters—Parameters—Prompt Setting
User Manual References
Manager Operation
2.2.1 System Manager Features—
2.2.2 Message Manager Features—

3.2.1.42 Transfer Recall to a Mailbox

Description
If a call is transferred to an extension via the Automated Attendant (AA) service and the call is not answered
within a preprogrammed Transfer Recall time, the call is redirected to the mailbox of the transfer destination
extension. Therefore the caller can leave a message in the mailbox of the extension without knowing the
mailbox number. The "Transfer Recall to Mailbox" setting must be enabled through system programming to
use this feature.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Recall (s)
11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings—
Feature Guide References
3.2.1.3 Automated Attendant (AA)

3.2.1.43 Transfer to Mailbox

Description
Forwards the call to a specified mailbox.
Calls reach the Transfer to Mailbox Service when the Incoming Call Service of a trunk group or port is set to
"Transfer to Mailbox".
PC Programming Manual References
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group—
Break Mode - Incoming Call Service
352 Feature Guide
Prompt Mode
Setting Class of Service (COS) Parameters
Recording Messages
Recall—Transfer
Transfer Recall to Mailbox
Day, Night, Lunch, and