Panasonic KX-NS500 Features Manual page 237

This PBX supports 4 modification tables, each of which can be used for any number of trunk groups. Each
table has 10 locations for local/international calls and one for long distance calls. The PBX checks the local/
international call data first. If a match is not found, the long distance call data is applied.
After the caller's number is modified by the Length of Digits Modification Tables or CLIP Modification
Tables, the PBX checks the leading digits of the modified number for an area code programmed in the
Caller ID Modification Table assigned to that trunk group. For more information, refer to 11.1.3 PBX
Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification—Leading Digits in PC Programming
Manual.
[Example]
<Table Selection>
Trunk Modification
Group No. Table
1 1
2 3
: :
Note
When caller's information is sent through an ISDN line and the call type is Subscriber, National, or
International, the following modification table is used instead of the above table:
<Modification Table>
Subscriber Call Data
National Call Data
International Call Data
<Modification Table>
Modification Table 1
Local/International
Call Data 1
Local/International
Call Data 2
:
Local/International
Call Data 10
Long Distance
Call Data programmable
Removed No. of Digits Added No.
0
Blank
0
0
Area Code Removed No. of Digits Added No.
012 3
2
00
:
:
Not
0
0
00
2.19.1 Caller ID
Blank
001
:
0
Feature Guide 237