Panasonic KX-NS500 Features Manual page 479

5.
Time Service Button
A flexible button can be customised as the following buttons:
a.
Day/Night button
b.
Day/Night/Lunch button
c.
Day/Night/Break button
d.
Day/Night/Lunch/Break button
Each of these buttons is used for switching between modes. For example, pressing the Day/Night button
switches between day and night modes. All of these buttons show the current status as follows:
Light Pattern
Off
Red on
Green on
Slow green flashing
Slow red flashing
Note
Any extension user (except extension users allowed to change the mode) can only check the current
status on the display by pressing the Time Service button.
Conditions
•
System programming can set the following time periods:
–
Day-1 (Day Start time)
–
Lunch (Lunch Start time)
–
Day-2 (Lunch End time)
–
Night (Night Start time)
–
Break-1 Start
–
Break-1 End (Day restart)
–
Break-2 Start
–
Break-2 End (Day restart)
–
Break-3 Start
–
Break-3 End (Day restart)
•
Time Service Switching Mode (Automatic/Manual) Button
A flexible button can be customised as the Time Service Switching Mode (Automatic/Manual) button.
PC Programming Manual References
10.4 PBX Configuration—[2-4] System—Week Table
10.5 PBX Configuration—[2-5] System—Holiday Table
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Lunch / Break / Night) Switch
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Manager—
Switch
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for Time Service)
→ Parameter Selection (for Time Service - Automatic/Manual)
Status
Day mode
Night mode
Lunch mode
Break mode
Holiday mode
5.1.4 Time Service
Time Service (Day /
Time Service
Feature Guide 479