Transfer Recall To A Mailbox; Transfer To Mailbox; Trunk Service (Universal Port) - Panasonic KX-NS1000 Manual

3.2.1 System Features

3.2.1.43 Transfer Recall to a Mailbox

Description
If a call is transferred to an extension via the Automated Attendant (AA) service and the call is not answered
within a preprogrammed Transfer Recall time, the call is redirected to the mailbox of the transfer destination
extension. Therefore the caller can leave a message in the mailbox of the extension without knowing the
mailbox number. The "Transfer Recall to Mailbox" setting must be enabled through system programming to
use this feature.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Recall
11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings—
Feature Guide References
3.2.1.3 Automated Attendant (AA)

3.2.1.44 Transfer to Mailbox

Description
Forwards the call to a specified mailbox.
Calls reach the Transfer to Mailbox Service when the Incoming Call Service of a trunk group or port is set to
"Transfer to Mailbox".
PC Programming Manual References
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group—
Break Mode - Incoming Call Service

3.2.1.45 Trunk Service (Universal Port)

Description
Allows call handling features to behave differently depending on the trunk group that the calls are received on.
A service can be assigned to each trunk group, including: Voice Mail, Automated Attendant, Interview, Custom
Service, Fax, and Transfer to Mailbox. Custom Service is the most flexible of all the services because it allows
access to the other services by pressing one key.
Note
For caller convenience, we recommend programming all trunk groups to use Custom Service as the
Incoming Call Service (® 3.2.1.15 Custom Service).
PC Programming Manual References
Section 22 UM Configuration—[3] UM Extension / Trunk Service
310 Feature Guide
Recall—Transfer
Transfer Recall to Mailbox
Day, Night, Lunch, and