Wan - Planet CS-2000 User Manual

4.2 WAN

Set the WAN Interface Address
Step1. Interface
WAN 2/3 Interface's settings are almost the same as WAN 1 setting. The difference is that WAN 2/3
has the additional Disable function. The MIS engineer can use this function to disable WAN Interface 2/3.
Step2. The way to test the connection (ICMP and DNS):
ICMP: enter the persistent ping IP. (Or click Assist).
DNS：Enter the DNS server IP address and domain name. (Or click Assist.)
Sets the interval seconds during the packets transferring. (Per seconds).
Both of the two connection test is the standard to see if the WAN can work properly. The testing such as
the IP address, IP address for DNS server and the domain name all must be working forever long, or it will
make the CS-2000 appliance error.
CS-2000 UTM Content Security Gateway User's Manual
WAN, click Modify of WAN 1.
Disable the WAN interface
ICMP connection test
DNS connection test
- 43 -