Planet CS-2000 User Manual page 246

Step19 In VPN VPN Trunk , add the following settings：
Name, enter the Trunk Name.
From Source, select LAN.
In From Source Subnet / Mask, enter the LAN source IP (A Company) 192.168.10.0 and
mask 255.255.255.0.
In To Destination, select To Destination Subnet / Mask.
In To Destination Subnet / Mask, enter the LAN IP address 192.168.20.0 (B Company)
and mask 255.255.255.0.
In Tunnel, add the VPN_01 and VPN_02 IPSec VPN setting.
Select Show remoter Network Neighborhood.
Click OK.
CS-2000 UTM Content Security Gateway User's Manual
To add the VPN trunk setting
Complete to add the VPN trunk setting
- 240 -