Table of Contents
Advertisement
Sets DMZ Interface (Transparent Mode)
Step1.
In Interface
Step2.
In DMZ Interface, select Transparent Mode.
In DMZ Interface, select DMZ_ Transparent Mode from the drop-down menu.
Step3.
Select Ping, HTTP, and HTTPS.
Step4.
Click OK
The MIS engineer has to set the static IP address in WAN interface and select the
DMZ_TRANSPARENT mode in DMZ interface.
CS-2000 UTM Content Security Gateway User's Manual
DMZ.
Select the DMZ_TRANSPARENT mode
- 49 -
Advertisement
Table of Contents
