Table of Contents
Advertisement
Example 1. Ping
Step1.
In Diagnostic
address, to detects the status of WAN interface：
Enter the Destination IP / Domain name.
Enter the Packet size. ( Default setting is 32 Bytes )
Enter Count value. ( Default setting is 4)
Enter Wait time. ( Default setting is 1 second)
Enter the source packets Interface.
Click OK.
CS-2000 UTM Content Security Gateway User's Manual
Ping, the MIS engineer can set the CS-2000 send the packets to specific
Ping setting
- 546 -
Advertisement
Table of Contents
