Planet CS-2000 User Manual page 274

Policy
Comment
The description of policy.
Source Address and Destination Address
The active connection is the source IP and the passive connection is the destination IP .
Service
It represents the service item. The MIS engineer can select to use the system default setting or choose
the Policy Object
Option
Use the icon to display as the option enabled.
Icon
Authentication User
Content Blocking
IM/P2P Blocking
Schedule
Set the schedule time by policy.
Authentication User
User has to pass the authentication, and then connect to the network by Policy.
VPN Trunk
To apply the IPSec and PPTP VPN into VPN trunk by policy.
Action
To assign the path when the data packets pass through the WAN1, WAN2, WAN3 or WAN4 in the
CS-2000 or select to deny.
Service Custom, to use the custom setting.
Name
Schedule Enable the schedule auto run on certain time.
Authentication is enabled.
Traffic Log Traffic Log is enabled.
Statistics Statistics is enabled.
IDP IDP is enabled.
Content Blocking is enabled.
IM/P2P blocking is enabled.
Anti-Virus Anti-Virus is enabled.
Qos Qos management is enabled.
CS-2000 UTM Content Security Gateway User's Manual
Definition
- 268 -