Table of Contents
Advertisement
Step4.
In Virtual Server
Virtual Server Real IP
Virtual Server Real IP, enter 61.11.11.12（ Or click Assist to select）.
Click OK.
Click New Entry.
Service, select (Custom Service) VoIP_Service.
External Service Port, auto set From-Service (Custom).
Load Balance Server 1, enter 192.168.1.100.
Click OK.
Complete the virtual server setting.
If the Custom Service only use single port, the MIS engineer can modify the external port in Virtual
Server；Contrarily, when the Custom Service uses more than one port, the MIS engineer can not modify
the external service port in Virtual Server.
CS-2000 UTM Content Security Gateway User's Manual
Server 1 , add the new following settings：
click here to configure.
The virtual server real IP setting
The virtual server setting
- 143 -
Advertisement
Table of Contents
