Table of Contents
Advertisement
Icon
PERMIT VPN Trunk
Traffic Log
To record all the packets pass through the policy. The MIS engineer can click
Statistics
Use the graphic charts to display the flow statistics.
IDP
IDP can filter the packets which applied policy.
Content Blocking
To manage the packet contents which applied policy.
IM/P2P Blocking
Can limit the connection of IM and P2P.
Anti-Virus
To detect if the files has attached virus through the HTTP / WebMail, FTP and SMTP policy.
Qos
To setup the MAX.Bandwidth and G.Bandwidth by policy.（The Bandwidth is shared by the user qualified
by policy .）
MAX. Concurrent Sessions Per IP
To assign the maximum sessions for every IP by policy management. If the sessions are over the limit,
then it will not build successfully.
MAX. Concurrent Sessions
To assign the maximum sessions by policy management. If the sessions are over the limit, then it will not
build successfully.
Name
PERMIT ALL
PERMIT WAN1
PERMIT WAN2
DENY
PAUSE
CS-2000 UTM Content Security Gateway User's Manual
Definition
To permit the qualified packets can go through
WAN1, WAN2, and WAN3.
To permit the qualified Packets can pass by WAN1.
To permit the qualified Packets can pass by WAN2.
To permit the VPN Trunk qualified by Policy.
To deny the Packets qualified by Policy.
To stop the Policy.
- 269 -
to view.
Advertisement
Table of Contents
