Planet CS-2000 User Manual page 229

Step10 In VPN VPN Trunk add the following settings：
Name, enter the Trunk name.
From Source, select LAN.
From Source Subnet / Mask, enter the LAN address (A Company) 192.168.10.0 and Mask
255.255.255.0.
To Destination, select To Destination Subnet / Mask.
Enter the destination LAN IP address (B Company) 192.168.20.0 and mask 255.255.255.0.
In Tunnel, click Add, to add the VPN_A's IPSec VPN.
Select show remote Network Neighborhood.
Click OK.
CS-2000 UTM Content Security Gateway User's Manual
Add the VPN trunk setting
Complete the VPN trunk setting
- 223 -