Planet CS-2000 User Manual page 234

Step6 In IPSec Algorithm, select Data Encryption + Authentication or Authentication Only.
In ENC Algorithm (3DES/DES/AES/NULL), select 3DES. In AUTH Algorithm (MD5/SHA1),
select MD5, to assure the authentication methods.
In Perfect Forward Secrecy （ NO-PFS/ GROUP 1,2,5） , select GROUP 1 . In ISAKMP Lifetime,
Step7
enter 3600 seconds. In IPSec Lifetime, enter 28800 seconds.
Step8 In My ID, select Aggressive mode.
In My ID / Peer ID, the MIS engineer can select not to enter.
In My ID / Peer ID, if the MIS engineer wants to enter the IP, then it must be the two different IP
address. For example, 11.11.11.11, 22.22.22.22. If the MIS engineer want to add the number or
alphabet to access the authentication, then he must add the @ in front of the alphabet or the
numbers. For example, @123a, @abcd1.
Step9 Complete the IPSec Autokey settings.
CS-2000 UTM Content Security Gateway User's Manual
The IPSec Algorithm setting
The IPSec Perfect Forward Secrecy setting
The IPSec Aggressive mode setting
Complete the IPSec Autokey setting
- 228 -