Table of Contents
Advertisement
Step1
In Configure
Select Domain Name of Internal Mail Server.
Domain Name of Mail Server, enter the applied domain name.
IP Address of Mail Server, enter the IP address which the domain name of mail server
correspond to.
Step2
In Configure
Select Allowed External IP of Mail Relay.
IP Address, enter the external sender IP address.
Enter the Netmask.
Complete the mail relay setting.
CS-2000 UTM Content Security Gateway User's Manual
Mail Relay , add the first setting：
The first mail relay setting
Mail Relay , add the second setting：
The second mail relay setting
- 304 -
Advertisement
Table of Contents
