Example 1 User & User Group Authentication - Planet CS-2000 User Manual

5.5.1 Example 1 User & User Group Authentication
To plan the LAN user connect to the WAN through the authentication by policy.（To use the built-in
user and user group authentication.
Step1. In Authentication
The user's DNS server must correspond to the LAN interface through the CS-2000 appliance, in order to
enable the authentication.
Step2. In Authentication
Click New Entry.
Name, enter auth_group.
Click Add, to add the available authentication user to the selected authentication user in
the same user group.
Click OK.
Complete the user group settings in authentication.
CS-2000 UTM Content Security Gateway User's Manual
User, to add the Authentication – User Name.
The Authentication – User Name setting
User Group , add the new setting as following：
The user group authentication setting
- 81 -