Table of Contents
Advertisement
Step4
In Web VPN / SSL VPN
Click Modify.
Enable Web VPN.
VPN IP Range, enter 192.168.222.0 / 255.255.255.0.
Encryption Algorithm, select 3DES.
Protocol, select TCP.
Server Port, enter the default value of 1194.
Authentication User or Group, select laboratory.
Auto-Disconnect if idle enter 0.
Click OK.
It will automatically add the LAN interface which is the segment that allow the client to
access.
CS-2000 UTM Content Security Gateway User's Manual
Setting , add the following settings：
Enable Web VPN
Enable Web VPN
- 455 -
Advertisement
Table of Contents
