Configure - Planet CS-2000 User Manual

3.2 Configure

The so called configuration here is about the basic operating settings of the CS-2000 appliance. In this
Chapter, it will be defined as Setting, Date/Time, Multiple Subnet, Route Table, DHCP, Dynamic DNS,
Host Table, SNMP and Language.
Setting
Multi Security Firewall Configuration
The MIS engineer can export or import system setting files, reset factory setting, and format the
CS-2000's hard disk.
System Name Setting
The administrator can set up the company name and device name.
E-mail Setting
Enabling this function and the CS-2000 appliance will automatically send instant e-mail alert notification
to the MIS engineer when the system is attacked or some urgent events occurred.
Web Management
The MIS engineer can remote the CS-2000 appliance anywhere via Web UI. In addition, the MIS
engineer can change the used port number in CS-2000's remote management.
Set up the idle timeout as the MIS engineer log into the CS-2000 appliance. The CS-2000 appliance will
forced to logout the Web UI as the MIS engineer did not process any system monitoring or
management.
After changed HTTP or HTTPS port number, if the MIS engineer want to log in to Web UI from the WAN ,
he must change the web browser's port when log in to Web UI （For example ,
https://61.62.108.172:1025）
MTU Setting
The MIS engineer can modify the length of the sent and received packets anytime. The default value is
1500 Bytes.
Scanned HTTP / FTP Setting
Can set the file size to be scanned via HTTP and FTP.
Dynamic Routing (RIPv2)
CS-2000 UTM Content Security Gateway User's Manual
- 13 -
http://61.62.108.172:8080 and