Planet CS-2000 User Manual page 508

High Availability
IP Address (for Management)
After enabled high availability function, MIS engineer can respectively use two IP addresses to log in the
CS-2000 master and backup devices via Web UI.（The two IP addresses must be different and at the same
segment as in LAN port interface.）
High Availability Mode
This mode is to distinguish the settings in CS-2000 master and backup devices.
Synchronize configuration settings of system
In high availability mode, MIS engineer can set the CS-2000 master device to backup settings to backup
device in daily specific time.
Synchronize configuration settings of MASTER and BACKUP immediately
In high availability mode, CS-2000 master device can instantly backup the settings to backup device.
CS-2000 UTM Content Security Gateway User's Manual
- 502 -