Table of Contents
Advertisement
Step3
In To Destination, select Remote Gateway –Fixed IP or Domain Name, enter the Remote IP
address to link to A Company.
Step4
In Authentication Method, select Preshare, enter the Preshared Key. (The maximum Preshared
Key is 100 bytes.)
Step5
In Encapsulation, select ISAKMP Algorithm, choose the needed algorithm.
In ENC Algorithm (3DES/DES/AES), select 3DES. In AUTH Algorithm (MD5/SHA1), select
SHA1. In Group (GROUP 1, 2, 5), select GROUP 2. The both sides need to select the same
group.
CS-2000 UTM Content Security Gateway User's Manual
The IPSec To Destination IP setting
The IPSec Authentication Setting
The IPSec Encapsulation setting
- 227 -
Advertisement
Table of Contents
