Table of Contents
Advertisement
Example 2. Traceroute
Step1.
In Diagnostic
specific address by traceroute command, to detects the status of WAN interface：
Enter the Destination IP / Domain name.
Enter the Packet size.( Default setting is 40 Bytes )
Enter the MAX Time-to-Live.( Default setting is 30 Hops)
Enter the Wait time.( Default setting is 2 seconds)
Select the source packets Interface.
Click OK.
CS-2000 UTM Content Security Gateway User's Manual
Traceroute, the MIS engineer can set the CS-2000 send the packets to
Traceroute setting
- 549 -
Advertisement
Table of Contents
