Table of Contents
Advertisement
CS-2000 UTM Content Security Gateway User's Manual
Step10
In VPN
Trunk
New Entry , add the following settings：
Name, enter the Trunk Name.
From Source, select LAN.
From Source Subnet / Mask, enter the LAN IP address (B Company) 192.168.20.0 and
mask 255.255.255.0.
To Destination, select To Destination Subnet / Mask.
Enter To Destination LAN IP (A Company) 192.168.10.0 and mask 255.255.255.0.
In Tunnel, add the VPN_B's IPSec VPN setting.
Select Show remote Network Neighborhood.
Click OK.
Add the VPN trunk setting
Complete to add the VPN trunk setting
- 229 -
Advertisement
Table of Contents
