Table of Contents
Advertisement
Use restriction:
1. High Availability mode：
a. Set the WAN Port to be Static IP or non-Static IP, the device can process the system configuration
and session backup.
b. When set the WAN port to be the non-Static IP and enable the HA backup, the session backup will
stop after regain the WAN port IP.
c. The LAN port IP, MASTER management IP and BACKUP management IP need to be the unused and
different IP at the same segment.
2. VPN
IPSec：MIS engineer need to set the Keep Alive IP in VPN Trunk, to instantly create the VPN
when access the backup function.
3. VPN
PPTP：The PPTP is disabled in HA backup environment.
CS-2000 UTM Content Security Gateway User's Manual
- 510 -
Advertisement
Table of Contents
