Table of Contents
Advertisement
SIP protocol pass-through
Select this option to the device's SIP protocol pass-through. Once this function is enabled, the SIP
packets will be allowed to pass-through via CS-2000.
To-Appliance Packets Log
Select this option to the device's To-Appliance Packets Log. Once this function is enabled, every packet
to this appliance will be recorded for system administrator to trace.
System Reboot
Step1.
To restart the CS-2000 appliance, Click Reboot near Reboot Multi Security Firewall
Appliance.
Step2.
It shows the confirm dialogue of Are you sure to reboot?
Step3.
Click OK to restart, or click Cancel to terminate the action.
CS-2000 UTM Content Security Gateway User's Manual
Enable SIP protocol pass-through
Enable To-Appliance Packets Log
Start to reboot
- 22 -
Advertisement
Table of Contents
