Planet CS-2000 User Manual page 255

Step19 In VPN VPN Trunk , add the following settings：
In Name, enter the trunk name.
From Source, select LAN.
In From Source Subnet/ Mask, enter B Company's LAN source IP 192.168.20.0 and mask
255.255.255.0.
In To Destination, select To Destination Subnet / Mask.
In To Destination Subnet / Mask, enter A Company's LAN IP192.168.10.0 and mask
255.255.255.0.
In Tunnel, to Add the VPN_01 and VPN_02 IPSec VPN setting.
Select Show remote Network Neighborhood.
Click OK.
CS-2000 UTM Content Security Gateway User's Manual
To add the VPN trunk setting
Complete to add the VPN trunk setting
- 249 -