Primary Authorization - HP MSR Series Command Reference Manual

key (HWTACACS scheme view)
•
• secondary authentication (HWTACACS scheme view)
vpn-instance (HWTACACS scheme view)
•

primary authorization

Use primary authorization to specify the primary HWTACACS authorization server.
Use undo primary authorization to remove the configuration.
Syntax
primary authorization { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple } string
| single-connection | vpn-instance vpn-instance-name ] *
undo primary authorization
Default
No primary HWTACACS authorization server is specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the primary HWTACACS authorization server.
ipv6 ipv6-address: Specifies the IPv6 address of the primary HWTACACS authorization server.
port-number: Specifies the service port number of the primary HWTACACS authorization server. The
value range for the TCP port number is 1 to 65535, and the default setting is 49.
key { cipher | simple } string: Sets the shared key for secure communication with the primary
HWTACACS authorization server.
• cipher string: Sets a ciphertext shared key. The string argument is case sensitive.
In non-FIPS mode, the key is a string of 1 to 373 characters.
In FIPS mode, the key is a string of 15 to 373 characters.
• simple string: Sets a plaintext shared key. The string argument is case sensitive.
In non-FIPS mode, the key is a string of 1 to 255 characters.
In FIPS mode, the key is a string of 15 to 255 characters. The string must contain digits,
uppercase letters, lowercase letters, and special characters.
single-connection: The device and the primary HWTACACS authorization server use the same TCP
connection to exchange all authorization packets for all users. If you do not specify this keyword, the
device establishes a new TCP connection each time it exchanges authorization packets with the primary
authorization server for a user. If the HWTACACS server supports the single-connection method, HP
recommends that you specify this keyword to reduce TCP connections for improving system performance.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the primary HWTACACS
authorization server belongs, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If
the server is on the public network, do not specify this option.
88