HP MSR Series Command Reference Manual page 33

authorization default { hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ]
[ local ] | local | radius-scheme radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ]
[ local ] }
undo authorization default
Default
The default authorization method of an ISP domain is local.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform authorization. The following default authorization information applies after users
pass authentication:
Non-login users can access the network.
•
FTP, SFTP, and SCP users have the root directory of the NAS set as the working directory, but they
•
do not have the access permission to the root directory.
• Other login users are assigned the default user role. For more information about the default user
role function, see Fundamentals Configuration Guide.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
The default authorization method is used for all users who support this method and do not have an
authorization method configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
You can specify one primary authorization method and multiple backup authorization methods.
When the default authorization method is invalid, the device attempts to use the backup authorization
methods in sequence. For example, the authorization default radius-scheme radius-scheme-name local
none command specifies the default RADIUS authorization method and two backup methods (local
authorization and no authorization). The device performs RADIUS authorization by default and performs
local authorization when the RADIUS server is invalid. The device does not perform authorization when
both of the previous methods are invalid.
Examples
# Configure the default authorization method for ISP domain test to use RADIUS scheme rd for user
authorization and use local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization default radius-scheme rd local
19