Display Port-Security Mac-Address Block - HP MSR Series Command Reference Manual

Field
Current secure MAC addresses
Authorization

display port-security mac-address block

Use display port-security mac-address block to display information about blocked MAC addresses.
Syntax
display port-security mac-address block [ interface interface-type interface-number ] [ vlan vlan-id ]
[ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
vlan vlan-id: Specifies a VLAN by its ID. The value range is 1 to 4094.
count: Displays only the count of the blocked MAC addresses.
Usage guidelines
If you do not specify any parameters, the command displays information about all blocked MAC
addresses.
Examples
# Display information about all blocked MAC addresses on the MSR1000, MSR2000 or MSR3000
router.
<Sysname> display port-security mac-address block
MAC ADDR
0002-0002-0002
000d-88f8-0577
--- 2 mac address(es) found
# Display information about all blocked MAC addresses on the MSR4000 router.
<Sysname> display port-security mac-address block
MAC ADDR
--- On slot 0, no MAC address found ---
Description
Number of secure MAC addresses stored.
Indicates whether the authorization information from the
authentication server (RADIUS server or local device) is ignored or
not:
•
Permitted—Authorization information from the authentication
server takes effect.
•
Ignored—Authorization information from the authentication server
does not take effect.
Port
GE2/1/1
GE2/1/2
---
Port
191
VLAN ID
1
1
VLAN ID