Dot1X Guest-Vlan - HP MSR Series Command Reference Manual

Syntax
dot1x domain-delimiter string
undo dot1x domain-delimiter
Default
The device supports only the at sign (@) delimiter for 802.1X users.
Views
System view
Predefined user roles
network-admin
Parameters
string: Specifies a set of 1 to 16 domain name delimiters for 802.1X users. No space is required between
delimiters. Available delimiters include the at sign (@), backslash (\), and forward slash (/).
Usage guidelines
Any character in the configured set can be used as the domain name delimiter for 802.1X authentication
users.
The delimiter set you configured overrides the default setting. If the at sign (@) is not included in the
delimiter set, the device does not support the 802.1X users who use the at sign (@) as the domain name
delimiter.
If a username string contains multiple configured delimiters, the device takes the rightmost delimiter in the
username as the domain name delimiter. For example, if you configure the forward slash (/) and
backslash (\) as delimiters, the domain name delimiter for the username string 123/22\@abc is the
backslash (\).
Examples
# Specify the at sign (@) and forward slash (/) as domain name delimiters.
<Sysname> system-view
[Sysname] dot1x domain-delimiter @/
Related commands
display dot1x

dot1x guest-vlan

Use dot1x guest-vlan to configure an 802.1X guest VLAN on a port.
Use undo dot1x guest-vlan to restore the default.
Syntax
dot1x guest-vlan guest-vlan-id
undo dot1x guest-vlan
Default
No 802.1X guest VLAN is configured on a port.
Views
Ethernet interface view
120