Display Client-Verify Protected Ipv6 - HP MSR Series Command Reference Manual

Table 95 Command output
Field
Totally 3 protected IP addresses
IP address
VPN instance
Port
Type
Requested
Trusted
Related commands
client-verify protected ip

display client-verify protected ipv6

Use display client-verify protected ipv6 to display protected IPv6 addresses for client verification.
Syntax
MSR1000/MSR2000/MSR3000:
display client-verify { dns | http | tcp } protected ipv6 [ ipv6-address [ vpn vpn-instance-name ] ] [ port
port-number ] [ count ]
MSR4000:
display client-verify { dns | http | tcp } protected ipv6 [ ipv6-address [ vpn vpn-instance-name ] ] [ port
port-number ] [ slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dns: Specifies the DNS client verification function.
http: Specifies the HTTP client verification function.
tcp: Specifies the TCP client verification function.
ipv6-address: Specifies a protected IPv6 address. If no IPv6 address is specified, this command displays
all matching protected IPv6 addresses.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the protected IPv6
address belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the protected IPv6 address is on the public network.
Description
Total number of protected IPv4 addresses.
Protected IPv4 address.
MPLS L3VPN instance to which the protected IPv4 address belongs. If the
protected IPv4 address is on the public network, this field displays hyphens
(--).
Port protected by TCP client verification. If TCP client verification protects all
ports, this field displays any.
Type of the protected IPv4 address, Manual or Dynamic.
Number of packets destined for the protected IPv4 address.
Number of packets that passed the client verification.
605