Object Group Commands; Description; Display Object Group - HP MSR Series Command Reference Manual

Object group commands

description

Use description to configure a description for an object group.
Use undo description to delete the description for an object group.
Syntax
description text
undo description
Default
An object group does not have a description.
Views
Object group view
Predefined user roles
network-admin
Parameters
text: Configures an object group description, a case-sensitive string of 1 to 127 characters.
Examples
# Configure a description for IPv4 address object group ipgroup.
<Sysname> system-view
[Sysname] object-group ip address ipgroup
[Sysname-obj-grp-ip-ipgroup] description This is an IPv4 object-group

display object group

Use display object group to display information about object groups.
Syntax
display object-group [ { { ip | ipv6 } address | service | port } [ default ] [ name object-group-name ] |
name object-group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ip address: Specifies the IPv4 address object group.
502