Reset Blacklist Ip - HP MSR Series Command Reference Manual

Syntax
reset attack-defense statistics local
Views
User view
Predefined user roles
network-admin
network-operator
Examples
Clear attack detection and prevention statistics for the device.
<Sysname> reset attack-defense statistics local
Related commands
display attack-defense statistics local

reset blacklist ip

Use rest blacklist ip to clear dynamic IPv4 blacklist entries.
Syntax
reset blacklist ip { source-ip-address [ vpn-instance vpn-instance-name ] | all }
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
source-ip-address: Specifies the IPv4 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv4 address belongs.
The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not specify this
option if the IPv4 address is on the public network.
all: Specifies all dynamic IPv4 blacklist entries.
Usage guidelines
This command deletes dynamic IPv4 blacklist entries. To delete manual IPv4 blacklist entries, use the
undo blacklist ip command.
Examples
# Clear all dynamic IPv4 blacklist entries.
<Sysname> reset blacklist ip all
Related commands
display blacklist ip
635