HP MSR Series Command Reference Manual page 176

Table 19 Command output
Field
Portal Web server
URL
URL parameters
VPN instance
Server detection
IPv4/IPv6 status
Related commands
• portal enable
portal web-server
•
server-detect (portal Web server view)
•
ip
Use ip to specify the IP address of an IPv4 portal authentication server.
Use undo ip to delete the IP address of the IPv4 portal authentication server.
Syntax
ip ipv4-address [ vpn-instance vpn-instance-name ] [ key { cipher | simple } key-string ]
undo ip
Default
The IP address of the IPv4 portal authentication server is not specified.
Views
Portal authentication server view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IP address of the IPv4 portal authentication server.
Description
Name of the portal Web server.
URL of the portal Web server.
URL parameters for the portal Web server.
Name of the MPLS L3VPN where the portal Web server resides.
Parameters for portal Web server detection:
•
Detection interval in seconds.
•
Maximum number of detection attempts.
•
Actions (log and trap) triggered by the reachability status change of the portal Web
server.
Current state of the portal Web server:
•
N/A—Portal Web server detection is disabled. Reachability status of the server is
unknown.
•
Up—Portal Web server detection is enabled. The server is reachable.
•
Down—Portal Web server detection is enabled. The server is unreachable.
162