Session Aging-Time State - HP MSR Series Command Reference Manual

ras: Specifies the RAS protocol.
rtsp: Specifies the Real Time Streaming Protocol (RTSP) protocol.
sip: Specifies the Session Initiation Protocol (SIP) protocol.
tftp: Specifies the TFTP protocol.
ils: Specifies the Internet Locator Service (ILS) protocol.
mgcp: Specifies the Media Gateway Control Protocol (MGCP) protocol.
nbt: Specifies the NetBIOS over TCP/IP (NBT) protocol.
pptp: Specifies the Point-to-Point Tunneling Protocol (PPTP) protocol.
rsh: Specifies the Remote Shell (RSH) protocol.
sccp: Specifies the Skinny Client Control Protocol (SCCP) protocol.
sqlnet: Specifies the SQLNET protocol.
xdmcp: Specifies the X Display Manager Control Protocol (XDMCP) protocol.
time-value: Sets the aging time in seconds. The value range for the time-value argument is 5 to 100000.
Usage guidelines
This command sets the aging time for stable sessions of the specified application layer protocols. For TCP
sessions, the stable state is ESTABLISHED. For UDP sessions, the stable state is READY.
For sessions of application layer protocols that are not supported by this command, the aging time is set
by the session aging-time state command. For persistent sessions, the aging time is set by the session
persistent acl command.
Examples
# Set the aging time for FTP sessions to 1800 seconds.
<Sysname> system-view
[Sysname] session aging-time application ftp 1800
Related commands
• display session aging-time application

session aging-time state

•
• session persistent acl
session aging-time state
Use session aging-time state to set the aging time for the sessions in a protocol state.
Use undo session aging-time state to restore the default. If no protocol state is specified, this command
restores all aging time for sessions in different protocol states to the default.
Syntax
session aging-time state { fin | icmp-reply | icmp-request | rawip-open | rawip-ready | syn | tcp-est
| udp-open | udp-ready } time-value
undo session aging-time state [ fin | icmp-reply | icmp-request | rawip-open | rawip-ready | syn |
tcp-est | udp-open | udp-ready ]
481