Authentication Ppp - HP MSR Series Command Reference Manual

Default
The default authentication method of the ISP domain is used for portal users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
ldap-scheme ldap-scheme-name: Specifies an LDAP scheme by its name, a case-insensitive string of 1 to
32 characters.
local: Performs local authentication.
none: Does not perform authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
You can specify one primary authentication method and multiple backup authentication methods.
When the primary method is invalid, the device attempts to use the backup methods in sequence. For
example, the authentication portal radius-scheme radius-scheme-name local none command specifies
the default primary RADIUS authentication method and two backup methods (local authentication and
no authentication). The device performs RADIUS authentication by default and performs local
authentication when the RADIUS server is invalid. The device does not perform authentication when both
of the previous methods are invalid.
Examples
# Configure ISP domain test to use local authentication for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication portal local
# Configure ISP domain test to use RADIUS scheme rd for portal users and use local authentication as the
backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication portal radius-scheme rd local
Related commands
authentication default
•
ldap scheme
•
local-user
•
• radius scheme

authentication ppp

Use authentication ppp to configure the authentication method for PPP users.
Use undo authentication ppp to restore the default.
14