Field
RAWIP sessions
Current relation-table entries
Session establishment rate
Received TCP
Received UDP
Received ICMP
Received ICMPv6
Received UDP-Lite
Received SCTP
Received DCCP
Received RAWIP
display session table
Use display session table to display session entries.
Syntax
MSR1000/MSR2000/MSR3000:
display session table { ipv4 | ipv6 } [ source-ip source-ip ] [ destination-ip destination-ip ] [ verbose ]
MSR4000:
display session table { ipv4 | ipv6 } [ slot slot-number ] [ source-ip source-ip ] [ destination-ip
destination-ip ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv4: Specifies IPv4 session entries.
ipv6: Specifies IPv6 session entries.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays the
session entries that match specific criteria on all cards. (MSR4000.)
source-ip source-ip: Specifies a source IP address. The source-ip argument specifies the source IP address
of a session from the initiator to the responder.
Description
Number of Raw IP sessions and number of Raw IP sessions in
different states.
Total number of relation entries.
Session establishment rate, and rates for establishing sessions of
different protocols.
Number of received TCP packets and packet bytes.
Number of received UDP packets and packet bytes.
Number of received ICMP packets and packet bytes.
Number of received ICMPv6 packets and packet bytes.
Number of received UDP-Lite packets and packet bytes.
Number of received SCTP packets and packet bytes.
Number of received DCCP packets and packet bytes.
Number of received Raw IP packets and packet bytes.
470