Display Application - HP MSR Series Command Reference Manual

app1
bapp3
pop3
smtp
Table 57 Command output
Field
Group name
Group ID
Type
Application count
Include application list
Application name
App ID
Related commands
app-group
•
include
•

display application

Use display application to display information about the specified application protocols.
Syntax
display application [ name application-name | pre-defined | user-defined ]
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
name application-name: Specifies an application protocol by its name. The application-name argument
is a case-insensitive string of 1 to 63 characters.
pre-defined: Specifies the pre-defined application protocols.
user-defined: Specifies the user-defined application protocols.
Usage guidelines
If you do not specify any parameters, this command displays information about all application protocols.
User-defined 0x80000001
User-defined 0x80000006
Pre-defined 0x00000e75
Pre-defined 0x00001135
Description
Application group name.
Application group ID.
Application protocol or application group attribute:
•
Pre-defined.
•
User-defined.
Number of application protocols in the application
group.
Application group application protocol list.
Application protocol name.
Application protocol ID.
448