802.1X Commands; Display Dot1X - HP MSR Series Command Reference Manual

802.1X commands

In this chapter, "MSR1000" refers to MSR1002-4. "MSR2000" refers to MSR2003, MSR2004-24,
MSR2004-48. "MSR3000" collectively refers to MSR3012, MSR3024, MSR3044, MSR3064.
"MSR4000" collectively refers to MSR4060 and MSR4080.
The commands configured in Ethernet interface view are available only on the following ports:
The fixed Layer 2 Ethernet ports on the MSR1000, MSR2004-24 and MSR2004-48 routers.
•
The ports on the HMIM-24GSW/24GSWP and HMIM-8GSW Layer 2 switching modules installed
•
on MSR routers.

display dot1x

Use display dot1x to display information about 802.1X.
Syntax
display dot1x [ sessions | statistics ] [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
sessions: Displays 802.1X session information.
statistics: Displays 802.1X statistics.
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If you specify neither the sessions keyword nor the statistics keyword, the command displays all
information about 802.1X, including session information, statistics, and configurations.
Examples
# Display all information about 802.1X.
<Sysname> display dot1x
Global 802.1X parameters:
802.1X authentication
CHAP authentication
Max-tx period
Handshake period
Quiet timer
Quiet period
Supp timeout
Server timeout
: Enabled
: Enabled
: 30 s
: 15 s
: Disabled
: 60 s
: 30 s
: 100 s
110