Display User-Group - HP MSR Series Command Reference Manual

Field
Password complexity
Maximum login attempts
Action for exceeding login attempts

display user-group

Use display user-group to display the user group configuration.
Syntax
display user-group [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name: Specifies a user group by its name, a case-insensitive string of 1 to 32 characters. If you do
not specify a user group, this command displays the configuration of all user groups.
Examples
# Display the configuration of all user groups.
<Sysname> display user-group
Total 2 user groups matched.
The contents of user group system:
Authorization Attributes:
Work Directory:
The contents of user group jj:
Authorization Attributes:
Idle TimeOut:
Callback Number:
Work Directory:
ACL Number:
VLAN ID:
Password control configurations:
Password aging:
Description
This field appears only when password complexity checking is enabled.
The field also displays the following information in parentheses:
•
Whether the password can contain the username or the reverse of the
username.
•
Whether the password can contain any character repeated
consecutively three or more times.
Maximum number of consecutive failed login attempts.
Action to take on the user who failed to log in after using up all login
attempts.
flash:
2 (min)
2:2
flash:/
2000
2
Enabled (2 days)
38