Display Hwtacacs Scheme - HP MSR Series Command Reference Manual

Related commands

display hwtacacs scheme

display hwtacacs scheme
Use display hwtacacs scheme to display the configuration or statistics of HWTACACS schemes.
Syntax
display hwtacacs scheme [ hwtacacs-scheme-name [ statistics ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a case-insensitive string of 1 to
32 characters. If you do not specify an HWTACACS scheme, this command displays the configuration of
all HWTACACS schemes.
statistics: Displays the HWTACACS service statistics. If you do not specify this keyword, the command
displays the configuration of the HWTACACS scheme.
Examples
# Displays the configuration of all HWTACACS schemes.
<Sysname> display hwtacacs scheme
Total 1 TACACS schemes
------------------------------------------------------------------
HWTACACS Scheme Name
Index : 0
Primary Auth Server:
IP : 2.2.2.2
VPN Instance: 2
Single-connection: Enabled
Primary Author Server:
IP : 2.2.2.2
VPN Instance: 2
Single-connection: Disabled
Primary Acct Server:
IP : Not Configured
VPN Instance: Not configured
Single-connection: Disabled
VPN Instance
NAS IP Address
Server Quiet Period(minutes)
Realtime Accounting Interval(minutes) : 12
: hwtac
Port: 49 State: Active
Port: 49 State: Active
Port: 49 State: Block
: 2
: 2.2.2.3
: 5
79